8
English
PLA SPRAY GUN
•
DO NOT USE METAL TOOLS TO CLEAN THE NOZZLES,
SINCE THEY MAY BE SCRATCHED AND CAUSE UNEvEN
SPRAYING.
•
DO NOT RUB THE SPRAYGUN WITH CLOTHS SOAKED
IN SOLvENT.
•
DO NOT IMMERSE THE SPRAYGUN IN SOLvENT.
The high speed of the product flowing in the hose
can create static electricity through discharges
and sparks. It is suggested to earth the equipment.
The pump is earthed through the earth cable of
the supply.
The gun is earthed through the high pressure
flexible hose.
All the conductors near the work area must be
earthed.
•
NEvER SPRAY OvER FLAMMABLE PRODUCTS OR SOL-
vENTS IN CLOSED PLACES.
•
NEvER USE THE TOOLING IN PRESENCE OF POTEN-
TIALLY EXPLOSIvE GAS.
Always check the product is compatible with the
materials composing the equipment
(pump, spray
gun, flexible hose and accessories)
with which it
can come into contact. Never use paints or sol-
vents containing halogen hydrocarbons
(as the
methylene chloride)
.
If these products come into contact with aluminium
parts can provoke dangerous chemical reactions
with risk of corrosion and explosion.
IF THE PRODUCT TO BE USED IS TOXIC, AvOID
INHALATION AND CONTACT BY USING PRO-
TECTION GLOvES, GOGGLES AND PROPER
FACE SHIELDS.
TAKE PROPER SAFETY MEASURES FOR THE
PROTECTION OF HEARING IN CASE OF WORK
NEAR THE PLANT.
•
WHENEvER YOU STOP DISPENSING, EvEN FOR A MO-
MENT, ALWAYS SET THE GUN TRIGGER LOCK. FULLY
RELEASE THE TRIGGER AND ROTATE THE TRIGGER
LOCK FORWARD (
see page 9
).
•
PAY THE UTMOST ATTENTION WHEN CLEANING OR
CHANGING THE FLUID NOZZLE. IF THE NOZZLE CLOGS
WHILE DISPENSING, FULLY RELEASE THE TRIGGER
IMMEDIATELY. ALWAYS FOLLOW THE PRESSURE RELIEF
PROCEDURE, BELOW, BEFORE WIPING OFF BUILD-UP
AROUND THE NOZZLE OR REMOvING THE NOZZLE TO
CLEAN IT.
•
DO NOT DIRECT THE SPRAYGUN UPWARDS DURING
CLEANING.
