LAQUA LAQUA-EC1100 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 77

LAQUA LAQUA-EC1100 Скачать руководство пользователя страница 2

I

Preface

This manual describes the operation of the  Benchtop  Conductivity  Meter  LAQUA-
EC1100.
Be sure to read this manual before using  the  product  to  ensure  proper  and  safe
operation of the product. Also safely store the manual so it is readily available whenever
necessary.
Product specifications and appearance, as well as the  contents  of  this  manual  are
subject to change without notice.

■

Warranty and responsibility

HORIBA, Ltd. warrants that the Product shall be  free  from  defects  in  material  and
workmanship and agrees to repair or replace free of charge, at option of HORIBA, Ltd.,
any malfunctioned or damaged Product attributable to responsibility of HORIBA, Ltd. for
a period of two  (2) years from the delivery unless otherwise  agreed  with  a  written
agreement. In any one of the following cases, none of  the  warranties  set  forth  herein
shall be extended;

・

Any malfunction or damage attributable to improper operation

・

Any malfunction attributable to repair or modification by any person not authorized
by HORIBA, Ltd.

・

Any malfunction or damage attributable to the use in an environment not specified in
this manual

・

Any malfunction or damage attributable to violation of the instructions in this manual
or operations in the manner not specified in this manual

・

Any malfunction or damage attributable to any cause or causes beyond the
reasonable control of HORIBA, Ltd. such as natural disasters

・

Any deterioration in appearance attributable to corrosion, rust, and so on

・

Replacement of consumables

HORIBA, LTD. SHALL NOT BE LIABLE FOR ANY DAMAGES RESULTING FROM ANY
MALFUNCTIONS OF THE PRODUCT, ANY ERASURE OF DATA, OR ANY OTHER
USES OF THE PRODUCT.

■

Trademarks

・

Microsoft, Windows, Windows Vista are registered trademarks or trademarks of

Microsoft Corporation in the United States and other countries.

Other company names and brand names are either registered trademarks or trademarks
of the respective companies. (R), (TM) symbols may be omitted in this manual.

CODE:I2005017000



3200635702



GZ0000427794

January, 2016

　　



2016 HORIBA, Ltd.

«
1
2
3
4
...
»

Содержание LAQUA-EC1100














































































Отзывы:

Нет отзывов