ETHERLINE
®
ACCESS NF04T | Version 1 | 04/16/20
49
13
Resetting to factory settings
The resetting of the ETHERLINE
®
ACCESS NF04T to factory settings can be initiated both via the website and
without access to the device with the “FCN” button.
When resetting the ETHERLINE
®
ACCESS NF04T, the configuration is irretrievably deleted and the IP settings are set
to the delivery status. The firmware remains at the current status in the process.
13.1
Resetting to factory settings via the website
Select the menu point “Factory Reset” in the
“Device” menu.
Press the “Factory Reset” button and confirm with
the confirmation prompt.
13.2
Resetting to factory settings with button
In order to reset ETHERLINE
®
ACCESS NF04T to the delivery status, the “FCN” button must be held pressed while
the device is restarted. The successful resetting of the parameters and settings is acknowledged by the lit “USR”
LED. The “FCN” button can then be released.
You can trigger a restart of the ETHERLINE
®
ACCESS NF04T with the “RST” button or switch the power off and on
again.
