ETHERLINE
®
ACCESS NF04T | Version 1 | 04/16/20
48
12
Firmware update
The firmware of the ETHERLINE
®
ACCESS NF04T can be very simply updated via the website.
Link to the current firmware:
www.lappkabel.com/activenetworkcomponents
The firmware file can be recognized by “.HUF”
extension and is also encoded to protect it from
being changed.
File the firmware file on your PC and select the
storage location with “Browse”.
The firmware file is then transferred to the
ETHERLINE
®
ACCESS NF04T. This can take up to
1 minute, depending upon the network
connection.
The firmware file is decoded and checked in the
ETHERLINE
®
ACCESS NF04T. If the content is
correct, the firmware is burned into the program
memory and a restart of the ETHERLINE
®
ACCESS
NF04T takes place.
Operation of the ETHERLINE
®
ACCESS NF04T is interrupted during the update procedure. Do not turn off the device
during the update procedure!
The configuration of the ETHERLINE
®
ACCESS NF04T is retained at a higher version following an update, to the
extent that this is technically possible. However, a “downgrade” to an older firmware version can result in
configuration errors. Carrying out a factory reset is recommended following a downgrade.
Following a firmware update, it may be necessary to delete the browser cache once in order to update obsolete
JavaScript elements of the ETHERLINE
®
ACCESS NF04T website.
