44428235
Assembly instruction
Valid from
28.07.2021
EPIC
®
SOLAR 4PLUS
Document: L44428235EN
Version: 03
Page 6 of 8
We reserve all rights according to DIN ISO 16016.
Crimping the contacts
Check that contact and cross-section match.
Insert the contact with the opening facing upwards into the EPIC
®
SOLAR Crimping tool.
Insert the wire completely into the crimp area of the contact.
The cable is pushed forward until the insulation strikes the
crimp receptacle of the contact. In this way a supernatant
of at least 2 mm is ensured.
Completely squeeze the tool until the trigger lock releases the tool again.
Remove the crimp and visually check that all strands are completely enclosed.
The strand supernatant after crimping is at least 2 mm.
Explanation of the crimping process
Contact in the crimp insert
Contact in the crimp insert with cable
Strand
supernatant
Crimping area
