24
4
Menu:
DEVICE / Feeder
Command:
<ESC>K10;
p
<CR>
An optional feeder with stack could be connected.
Setting range:
p
0 = without feeder
1 = with feeder
Menu:
DEVICE / Standby
Command:
<ESC>K40;
p
<CR>
If the laminator is not used for 30 minutes it switches to energy-saving mode.
The temperature of the heated roller drops in this mode. Press to finish.
The energy-saving mode must be active for this!
Setting range:
p
0 = Standby off
1 = Standby on
CLEAR
Command:
<ESC>K80;
p
<CR>
Change foil category. The “Alternative foil”-Option only makes sense in
connection with front- and back-lamination commands (K02;3 and K02;4).
Setting range:
0 = Normal foil
1 = Alternative foil
