The first index mark on the film should lie before sensor (4), in order that
no patch is lost.
12
2
Inserting film
There is a risk of burning on the safety guard for the heated roller (5)
4
1
2
5
3
When inserting or exchanging patch film proceed as follows:
• Switch off the device and let it cool down
• Open housing cover
• Release the heated roller interlocking. To do so push the lever (3) up.
• When exchanging the film additionally empty carrier rollers (1,2)
• Slide the film roll onto the unwinding carrier roller (1) until it reaches the limit
stop.
• Slide an empty film core onto the winding carrier roller (2) until it reaches the
limit stop.
• Insert the film in accordance with the drawing shown above. Attach the start
of the film to the empty core with adhesive tape.
• Close the heated roller interlocking. To do so push the lever (3) down.
• Switch on the device.
• Transport film with to the first patch and when doing so check that the
film runs correctly and crease-free.
