15: Services Settings
xSenso User Guide
83
To Configure SNMP Settings
Using Web Manager
To configure SNMP, go to the
Admin
tab/page and click
SNMP
in the menu.
Using the CLI
To enter the SNMP command level:
enable -> config -> snmp
Using XML
Include in your file:
<configgroup name=”snmp”>
SMTP Settings
Table 15-8 SMTP Network Stack Settings
System Description
Update the system description, as necessary. The default system information
includes the manufacturer name, xSenso model name, version and the serial
number of the device.
System Location
Specify a system location for the SNMP setting.
Lantronix MIB File
Click the Lantronix MIB file name to save and load it into the MIB browser and trap
receiver.
xSenso MIB File
Click the xSenso MIB file name to save and load it into the MIB browser and trap
receiver.
Primary Destination
Enter the
primary SNMP trap receiver
for the enabled SNMP agent. This is either
an IP address or a hostname.
Secondary
Destination
Enter the
secondary SNMP trap receiver
for the enabled SNMP agent. This is
either an IP address or a hostname.
Protocol Stack SMTP
Settings
Description
From Address
Enter the From Address here. This is an email address and is required. If you wish
to direct oubtound email messages through a mail server, put your client email
address here.
Server Address
Enter the Server Address to direct outbound email messages through a mail
server.
Server Port
Enter the SMTP server port number. The default is 25
Username
Enter a Username to direct outbound email messages through a mail server.
Password
Enter a Password to direct outbound email messages through a mail server.
Overriding Domain
Enter the domain name to override the current domain name in EHLO (Extended
Hello).
RSS Settings
Description
