XPort Pro User Guide
15
2:
Introduction
The
XPort Pro
embedded Ethernet Device Server is a complete network-enabling solution in a
13.50 (0.531) X 16.25 (0.640) X 33.90 (1.335) package. This miniature device server empowers
original equipment manufacturers (OEMs) to go to market quickly and easily with Ethernet
networking and web page serving capabilities built into their products. [DIMS = mm (in.)]
This chapter contains the following sections:
Key Features
Power Supply: Regulated 3.3V input required. There is a step-down converter to 1.5 volts for
the processor core. All voltages have LC filtering to minimize noises and emissions.
Controller: A Lantronix DSTni-FX 32-bit microprocessor, running at 166 MHz internal bus and
83 MHz external bus.
Memory: 16 MB Flash and 8
/16
MB SDRAM. Please contact your sales representative if you
need larger memory sizes.
Ethernet: 10/100 Mbps Ethernet transceiver
Serial Ports: RS232-supporting high-speed serial port with all hardware handshaking signals.
Baud rate is software selectable (300 bps to 921600 bps).
Note:
The standard baud rate of 460800 bps is not supported for XPort Pro.
Configurable IO Pins (CPs): Up to three pins are configurable as general purpose I/Os if no
DTR or DCD is used on serial ports. Not 5V tolerant.
Interface Signals: 3.3V-level interface signals.
Temperature Range: Operates over an extended temperature range of -40°C to +85°C.
Applications
The XPort Pro device server connects serial devices such as those listed below to Ethernet
networks using the IP protocol family.
ATM machines
CNC controllers
Data collection devices
Содержание xport pro
Страница 1: ...Part Number 900 560 Revision 0DrFK 201 XPort Pro User Guide ...
Страница 38: ...6 Line and Tunnel Settings XPort Pro User Guide 38 Figure 6 6 Tunnel 1 Statistics ...
Страница 119: ...12 Maintenance and Diagnostics Settings XPort Pro User Guide 119 Figure 12 28 Diagnostics Processes ...