xPico
®
200 Certification Firmware Instructions
17
BT Test Command
Description
bt_set_tx_frequency_arm <carrier
On/Off> <tx_frequency> <tx_mode>
<tx_modulation_type> <tx_power>
Cypress equivalent command
mbt tx_frequency_arm
This test turns on or off the transmitter carrier.
carrier on/off:
1: carrier on
0: carrier off
tx_frequency can be from 2402 MHz to 2480 MHz
tx_mode selects unmodulated or modulated with
pattern
0: Unmodulated
1: PRBS9
2: PRBS15
3: All Zeros
4: All Ones
5: Incrementing Symbols
tx_modulation_type selects 1 Mbps, 2 Mbps, or
3 Mbps modulation. This is ignored if mode is
unmodulated.
0: GFSK
1: QPSK
2: 8PSK
3: LE
tx_power can be from
–25 dBm to +3 dBm
bt_receive_only <rx_frequency>
Cypress equivalent command
mbt receive_only
This test instructs the BT radio to receive on a
specific frequency.
Rx_frequency can be from 2402 to 2480.
