xPico 200 Series - JTAG Programming
6
Software Instructions
1. Obtain a Windows 10 computer to work from.
2. Extract the contents of the .zip file (filename is
xPico200Recovery.zip
) to the
C:\
directory.
3. Connect the Olimex ARM-USB-TINY-H to a USB port on the PC; a "Setting up device.."
message will appear.
4. Wait for the "Device is ready" message to appear.
5. From the extracted files, locate and run zadig-2.5.exe.
6. From the Zadig application, install Win-USB on Olimex
Interface 0
; see the image below.
7. Click
Install Driver.
Once complete, the message "Driver Installation: SUCCESS" will appear
as shown in the image below.
