background image

   

xPico 200 Series - JTAG Programming 

 

Intellectual Property 

© 2021 Lantronix, Inc. All rights reserved. No part of the contents of this publication may be 

transmitted or reproduced in any form or by any means without the written permission of 

Lantronix.  

Lantronix

 is a registered trademark of Lantronix, Inc. in the United States and other countries.   

Patented: 

http://patents.lantronix.com

; additional patents pending. 

All trademarks and trade names are the property of their respective holders.  

Contacts 

Lantronix, Inc.

 

7535 Irvine Center Drive, Suite 100 

Irvine, CA 92618, USA 

Toll Free:  800-526-8766 

Phone:   949-453-3990 

Fax:  

949-453-3995 

Technical Support

 

Online:   

www.lantronix.com/support

 

Sales Offices

 

For a current list of our domestic and international sales offices, go to the Lantronix web site at 

www.lantronix.com/about/contact

 

Disclaimer 

All information contained herein is provided “AS IS.”  Lantronix undertakes no obligation to 

update the information in this publication.  Lantronix does not make, and specifically disclaims, 

all warranties of any kind (express, implied or otherwise) regarding title, non-infringement, 

fitness, quality, accuracy, completeness, usefulness, suitability or performance of the 

information provided herein. Lantronix shall have no liability whatsoever to any user for any 

damages, losses and causes of action (whether in contract or in tort or otherwise) in 

connection with the user’s access or usage of any of the information or content contained 

herein.  The information and specifications contained in this document are subject to change 

without notice. 
 
 
 
 
 
 
 
 

Содержание xPico 200 Series








Отзывы: