background image

For regular updates to Lantronix documentation and to receive product change 
notifications, register at the 

Lantronix homepage

Technical Support

 

Lantronix Technical Support

 offers many resources to support our customers and 

products. For instance, ask a question, find firmware downloads, access the FTP site and 
search through tutorials, FAQs, bulletins, warranty information, extended support 
services, and product documentation. 

To contact technical support or sales, look up your 

local office

. When you report a 

problem, please provide the following information: 

 

Your name, company name, address, and phone number 

 

Lantronix product and model number 

 

Lantronix MAC address or serial number 

 

Firmware version and current configuration 

 

Description of the problem 

 

Status of the unit when the problem occurred (please try to include information on user and 
network activity at the time of the problem). 

Revision History

 

Date Revision 

Comments 

November 2017 

Initial document (firmware 1.6.0.0R58) 

 

 

 

 

 

 

 

 

                                      

https://docs.lantronix.com/products/xpico

200/evk/

 

12

6

17

 

Содержание xPico 200 Series













Отзывы: