xPico 200 Evaluation Board
Connectors, Headers and Switches
Ref Des.
Connector/Header Functions
J7
xPico 200 Module Socket
JP1
3.3V Power Header
Test point to monitor the 3.3V regulator output.
JP2
Ground Header
Test point to connect to evaluation board signal ground.
JP3
USB Host/Device Select
Install Jumper to pins 1 to 2 for USB Device Mode
Install Jumper to pins 2 to 3 for USB Host Mode (Host mode also requires
jumper install on JP5, JP6 to provide power out of J9)
