xPico® 110 Wired Device Server Integration Guide
7
2. Functional Description
Designed for quick integration with minimal engineering effort, the chip-sized xPico
110 wired
device server module provides simplicity and flexibility making it the easiest and fastest network-
enabling module on the market.
The xPico 110 wired device server module is an extremely compact networking solution that
enables Ethernet connectivity on virtually any device with a serial interface. The included
industry-proven Lantronix device server application and full IP stack allow seamless remote
access to device data simplifying design integration while providing robust connectivity.
As one of the smallest wired device server modules, the xPico 110 can be utilized in designs
typically intended for chip solutions. A key difference between the xPico 110 wired device server
module as compared to other devices in the market is that there is virtually no need to write a
single line of code, translating to a much lower development cost and faster time-to-market.
Table 2-1 xPico 110 Part Numbers
Part Number
Description
XPC100200S-01
xPico 110 Wired Device Server Module, SMT, AES, Industrial Temp, 10-pack
XPC100200B-01
xPico 110 Wired Device Server Module, SMT, AES, Industrial Temp, Tape & Reel,
BULK
XPC100200K-01
xPico 110 Evaluation Kit, Wired Device Server Module
xPico 110 Features
The xPico 110 wired device server module contains Lantronix DSTni® EX controller, with internal
256 KBytes of SRAM, 16 KBytes of boot ROM, and integrated 10/100 PHY.
3.3-volt serial interface
16 Configurable I/O pins
All logic level I/O pins are 5V input tolerant
4-Mbit flash memory
Power supply filters
Reset circuit
+1.8V regulator
Note:
The xPico 110 wired device server module does not contain integrated Ethernet
magnetics. An external Ethernet magnetic module and RJ45 Jack is required to interface
to a standard 10/100 Mbps Ethernet network.
The xPico 110 unit re3.3-volt power, and is designed to operate in an extended
temperature range (see
).
