Configuration via Serial Mode or Telnet Port
40
WiPort™
User
Guide
Table 5-1. Standard IP Network Netmasks Representing Host Bits
Network Class
Host Bits
Netmask
A 24
255.0.0.0
B 16
255.255.0.0
C 8
255.255.255.0
Change Telnet Configuration Password
Setting the Telnet configuration password prevents unauthorized access to the setup
menu via a Telnet connection to port 9999 or via web pages. The password must
have 4 characters.
Change telnet config password (N) ? _
An enhanced password setting (for Telnet access only) of 16 characters is available
under option
6
Security
from the Change Setup menu.
Note:
A password is not required to access the Setup Mode window via a
serial connection.
DHCP Name
If a DHCP server has automatically assigned the IP address and network settings,
discover the unit by using the DeviceInstaller network search feature.
There are three methods for assigning DHCP names to the unit.
Default DHCP Name
: If the DHCP name is not changed and the IP is
0.0.0.0, then the DHCP name defaults to CXXXXXX (XXXXXX is the last 6
digits of the MAC address shown on the label on the bottom/side of the unit).
For example, if the MAC address is 00-20-4A-12-34-56, then the default
DHCP name is C123456.
Custom DHCP Name
: Create your own DHCP name. If using an IP address
of 0.0.0.0, then the last option in Server configuration is
Change DHCP
device name
. This option allows you to change the DHCP name to an
alphanumeric name (LTX in the example).
Change DHCP device name (not set) ? (N) Y
Enter new DHCP device name : LTX
Numeric DHCP Name:
Change the DHCP name by specifying the last octet
of the IP address. When using this method, the DHCP name is LTXYY where
YY is the last octet of the IP address. If the IP address specified is 0.0.0.12,
then the DHCP name is LTX12. This method only works with 2 digit numbers
(0-99).
Channel 1 and Channel 2 Configuration
Select option
1 Channel 1
or
2 Channel 2
from the Change Setup menu to define
how the serial port responds to network and serial communications
.
The following
sections describe the configurable parameters within the Channel configuration
menu.
