6: Configuration via Serial Mode or Telnet Port
WiPort Embedded Wireless Device Server User Guide
53
Connect Mode Option
7
6
5
4
3
2
1
0
Manual connection
0
1
0
0
Autostart
0
1
0
1
Hostlist
0
0
1
0
d) Datagram Type
Directed UDP
1
1
0
0
e) Modem Mode
No Echo
0
0
1
1
Echo & Modem Response (Numeric)
0
1
1
1
1
Echo & Modem Response (Verbose)
0
1
1
1
0
Modem Response Only (Numeric)
0
0
1
1
1
1
Modem Response Only (Verbose)
0
0
1
1
1
0
Incoming Connection
Never Accept Incoming
Rejects all external connection attempts.
Accept with active
Modem Control in
Accepts external connection requests only when
Modem
Control In
is asserted. Cannot be used with Modem Mode.
Always Accept
Accepts any incoming connection when a connection is not
already established. Default setting.
Response
Character Response
A single character is transmitted to the serial port when there is a
change in connection state:
C = connected, D = disconnected, N = host unreachable.
This option is overridden when the Active Start Modem Mode or
Active Start Host List is in effect. Default setting is Nothing
(quiet).
c)
Active Startup
No Active Startup
Does
not
attempt to initiate a connection. Default setting.
With Any Character
Attempts to connect when any character is received from the
serial port.
With active Modem
Control in
Attempts to connect when the
Modem Control In
input changes
from not asserted to asserted.
With a Specific Start
Character
Attempts to connect when it receives a specific start character
from the serial port. The default start character is carriage return.
Manual Connection
Attempts to connect when directed by a command string
received from the serial port. The first character of the command
string must be a
C
(ASCII 0x43), and the last character must be
either a carriage return (ASCII 0x0D) or a line feed (0x0A). No
blanks or space characters may be in the command string.