4: Configuration Using Web Manager
WiPort Embedded Wireless Device Server User Guide
28
Server Configuration
Enhanced Password
Note:
We recommend
that you always enable the
enhanced password
setting, and create a
strong 16 character
password.
Select whether to enable enhanced password:
Enable:
selecting this option enables advanced password
creation, allowing you to create passwords up to 16 bytes in
length.
Disable:
selecting this option disables advanced
password creation, allowing you to create basic passwords up
to 4 bytes in length.
Telnet/Web Manager
Password
Enter the password required for Telnet configuration and Web
Manager access.
Retype Password
Re-enter the password required for Telnet configuration and
Web Manager access.
Advanced
ARP Cache Timeout
(secs)
When the unit communicates with another device on the
network, it adds an entry into its ARP table. ARP Cache
timeout defines the number of seconds (1-600) before it
refreshes this table.
TCP Keepalive (secs)
TCP Keepalive time defines how many seconds the unit waits
during an inactive connection before checking its status. If the
unit does not receive a response, it drops that connection.
Enter a value between
0
and
65
seconds.
0
disables
keepalive.
Monitor Mode @ Bootup
Select
Disable
to disable the entry into the monitor mode via
the
yyy
or
xx1
key sequence at startup. This command
prevents the unit from entering monitor mode by interpreting
the stream of characters that are received during the device
server's initialization at startup.
CPU Performance Mode
Select the WiPort’s performance mode. Higher performance
settings require more energy.
Low
is 26 Mhz.
Regular
is 48
Mhz;
High
is 88 Mhz. The default is Regular.
HTTP Server Port
This option allows the configuration of the web server port
number. The valid range is
1-65535
. The default HTTP server
port number is 80.
Config Server Port
Allows for the configuration of the 0x77FE server port number.
Enter a number between
1
and
65535
. The configuration is
available only in bridging mode for the discovery of Lantronix
device servers behind the bridge. The default 0x77FE server
port number is 30718.
MTU Size
The Maximum Transmission Unit (MTU) is the largest physical
packet size a network can transmit for TCP and UDP. Enter
between 512 and 1400 bytes. The default is 1400 bytes.
TCP Re-transmission
timeout (ms)
The desired TCP re-transmission timeout value. If the ACK is
not received for a packet sent from the UDS device, then the
unit will retransmit the data. The valid range is 500-4000
msec.
3. When you are finished, click the
OK
button.
