Lantronix WiPort, Быстрый старт

Страница: 6 / 8

3. Respond to the installation wizard prompts. (If prompted to select an installation type,
select Typical.)
Note: For more information about DeviceInstaller, see the DeviceInstaller Online
Help .
Assign IP
The unit’s IP address is normally set for DHCP at the factory. The hardware address is
on the product label. The unit is DHCP enabled as the default. Change the IP address if
you do not want the network to automatically assign an IP address to the WiPort.
1. Click Start

Programs

Lantronix

DeviceInstaller

DeviceInstaller. If your PC
has more than one network adapter, a message displays. Select an adapter and click
OK .
Note: If the unit already has an IP address (e.g., DHCP has assigned an IP
address), click the Search icon and select the unit from the list of Lantronix
device servers on the local network.
2. Click the Assign IP icon .
3. If prompted, enter the hardware address (on the product label) in the format 00-20-
4a-XX-XX-XX, where the XXs are unique numbers assigned to the product. Click
Next .
4. Select Assign a specific IP address and click Next .
5. Enter the IP address . The Subnet mask displays automatically based on the IP
address; if desired, you may change it. On a local network, you can leave the Default
gateway blank (all zeros). Click Next .
WiPort Evaluation Kit Quick Start Guide 5