Lantronix SESPM1040-541-LT Series, Инструкция по установке, Страница: 32 / 64

Lantronix SESPM1040-541-LT-xx Install Guide
33772 Rev. F https://www.lantronix.com/ Page
32
of
64
There are temperature sensors within the switch to monitor the temperature inside the switch. If the power
supply within the switch gets too hot, all ports will be shut down regardless of priority. This is to prevent the
switch from overheating and causing permanent damage.
PoE Port Acceptable Power
Port 1
Device
Power
(W)
Port 2
Device
Power
(W)
Port 3
Device
Power
(W)
Port 4
Device
Power
(W)
Acceptable for -AC
Version?
Acceptable for -DC
Version?
Acceptable for -PD
Version?
15.4 15.4 15.4 15.4 Yes Yes Yes
30 30 30 30 Yes
Yes No, total power
exceeds 90W
30 30 30 0 Yes
Yes Yes, if using 802.3bt
compliant PSE
60 60 60 60
No, total power
exceeds 180W
Yes No, total power
exceeds 90W
60 45 45 30 Yes
Yes No, total power
exceeds 90W
90 0 0 0 Yes
Yes Yes, if using 802.3bt
compliant PSE
90 90 0 0
No, 90W devices
adjacent
No, 90W devices
adjacent
No, total power
exceeds 90W
90 0 90 0 Yes
Yes No, total power
exceeds 90W
90 15.4 90 15.4
No, total power
exceeds 180W
Yes No, total power
exceeds 90W
90 90 90 90
No, total power
exceeds 180W
No, total power
exceeds 240W
No, total power
exceeds 90W
CUSTOMER ACCESS
Use a 3/8" nut driver to unlock the enclosure. Push in and lift up on the
plastic lever to the right of the 3/8" bolt.
There is also access for an additional lock (not included).
Console Port
The Console port provides an RJ45 connector for serial connection to a network PC running a terminal emulation
package such as Hyper Term or PuTTY. See the SESPM1040-541-LT-xx Operation Guide for CLI command
information.