SCS100/200/400 User Guide
6: Application Setup
Serial Port Settings
3.
Enable port logging (also referred to as serial logging) by changing the
Serial Log
Size
from 0 to any number between 1 and 250 Kbytes.
Enabling Serial Logging and Email Events
This setting creates a log file on the
/ram
disk in the format
/ram/Port_xx.log
where
xx is the port name and changes the specified port to access remote. You can
access the port log via ftp to the
/ram
directory.
4.
Click the
Email Events
checkbox. This setting enables email notification for the serial
log.
5.
Click the
Update Port Settings
button to save changes.
When a port that has
Email Events
enabled receives a burst of 20 or more characters in
its serial log, the port buffers the incoming data for up to 25 seconds or until the log file
reaches 1500 bytes before sending the contents of the file via email.
6-12
