Lantronix MatriX-Hub Series 1000 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 49

Lantronix MatriX-Hub Series 1000 Скачать руководство пользователя страница 39

36

Appendix C – Sample Matrix -Hub Session

The following text is a sample session printed from a terminal program log file. It
contains examples of the use of Matrix-Hub commands in the two different
password levels.

Lightwave Communications Matrix Hub Console Copyright 1998
Version: 1.02
...please wait for initialization...
Enter password:

***

MatrixHub#

help

+===================== MaxtriX-Hub System Help ============================+
| ?,(H)elp - display this help |
| (C)onnect <chassis-id> <src port#> to <dst port#> |
| (B)roadcast <chassis-id> <src port#> to <dst port#> [,] [<dst port#>] |
| (C)onnect <src entity> to <dst entity> |
| (D)isconnect <chassis-id> <src port#> from <src port#> |
| (D)isconnect [<chassis-id>] ALL - disconnect all (can be restored) |
| (LO)goff - log off system |
| CLEAR [<chassis-id>] - Clear current connections (cannot be restored) |
|   - specifying chassis-id clears only that chassis |
| RESTORE [<chassis-id>] - Restore previous connections |
| specifying chassis-id restores only that chassis |
| connections |
| (VER)SION - display version information |
|- Entity Commands --------------------------------------------------------|
| EH - Entity Help |
| EL [<entity>] - List entities, list <entity> definition |
| EN <entity>   - create New entity |
| ED <entity>   - Delete entity |
| ES [<entity>] - Entity Status    |
|- Macro Commands ---------------------------------------------------------|
| MH - Macro Help |
| MR <macro> - Run a macro |

(press any key to continue)

| ML [<macro>] - List current macros, list <macro> definition |
| MN <macro> - create New macro |
| MD <macro> - Delete macro |
|- Passwords --------------------------------------------------------------|
| PH - Password Help |
| PL - List number of passwords defined |
| PD - Delete a password     |
| PN <access level> - New password |
|- Chassis ----------------------------------------------------------------|
| CH - Chassis Help     |
| CL - list all chassis including card inventory |
| CP <chassis-id> - Display chassis power (& temperature info if avail) |
| CS <chassis-id> - show connection info for a chassis |
+==========================================================================+
success
MatrixHub#

cl

Chassis-id List
---------------
1rV, V1.63, IIRGBOO
2rK, V1.63,II M K OO
3rS, V1.63, IIOO
success
MatrixHub#

ver

Firmware version 1.02 10/19/98 16:55:39
Text ROM version 1.00
success
MatrixHub#

cp 1

1PP1,Power Supply A +5V: OK
1PP1,Power Supply A -5V: OK
1PP1,Power Supply B +5V: OK
1PP0,Power Supply B -5V: OK

«
...
37
38
39
40
41
...
»

Содержание MatriX-Hub Series 1000


















































Отзывы:

Нет отзывов