Lantronix
M/GE-ISW-xx-01 User Guide
33627 Rev. D
Page 15 of 16
Cable and Optic Specifications
The fiber optic cable physical characteristics must meet or exceed IEEE 802.3ae specification.
Fiber Cable
Bit Error Rate:
<10-9
Single mode fiber (
recommended
):
9 μm
Multimode fiber (
recommended
):
62.5/125 μm
Multimode fiber (
optional
):
100/140, 85/140,
50/125 μm
Optics
M/GE-ISW-SX-01
850 nm multimode
Fiber-optic Transmitter Power:
min: -9.5 dBm
max: -4.0 dBm
Fiber-optic Receiver Sensitivity:
min: -17.0 dBm
max: 0.0 dBm
Link Budget:
7.0 dB
M/GE-ISW-LX-01
1310 nm single mode
Fiber Optic Transmitter Power:
min: -9.5 dBm
max: -3.0 dBm
Fiber Optic Receiver Sensitivity:
min: -20.0 dBm
max: -3.0 dBm
Link Budget:
10.5 dB
M/GE-ISW-LC-01
850 nm multimode
Fiber Optic Transmitter Power:
min: -9.0 dBm
max: 4.0 dBm
Fiber Optic Receiver Sensitivity:
min: -17.0 dBm
max: -3.0 dBm
Link Budget:
8.0 dBm
Part Number
Copper - Port
10/100/1000Base-TX
Fiber-Optic -Port
100Base-FX
M/GE-ISW-SX-01
RJ-45 100 m (
328 ft
)* SC, 850nm multimode (SC) 220 m (
.55 miles
)*
M/GE-ISW-LX-01
RJ-45 100 m (
328 f
t)* SC, 1310nm single mode (SC) 10 km (
18.6 miles
)*
M/GE-ISW-SFP-01
RJ-45 100 m (
328 f
t)* Open SFP
M/GE-ISW-LC-01
RJ-45 100 m (328 ft)*
LC, 850 nm multimode (LC)
220 km (136mi) on 62.5 micron fiber*
550 km (341 mi) on 50 micron fiber*
* Typical maximum cable distance. Actual distance depends on the network installation’s physical
characteristics.
