Lantronix M/GE-ISW 01 Series, Руководство пользователя

Страница: 10 / 22

Lantronix
M/GE-ISW-xx-01 User Guide
33627 Rev. D http://www.lantronix.com/ Page 10 of 11
Connecting Power
Connect to DC (12 – 48 VDC) or AC (22 – 36 VAC) power
□ 12-48 VDC and 22-36 VAC power input via the Terminal Block
□ Pig-tail Cable with Barrel Connector
Note : The Pitch EURO style Terminal block accepts 24-14 gauge wire.
1. Turn OFF the main power source.
2. Strip the power wires to the proper strip length.
3. Loosen the two screws in the Terminal Block. See figure below.
4. Insert the power wires into the Terminal Block as shown below (polarity agnostic).
5. Tighten the screw for each wire.
6. Connect the Barrel Connector end to the main power source.
7. Turn main power source ON. The front panel power LED should light.
Barrel Connector with Pig-tail Cable connected at Terminal Block