manualshive.com logo in svg

Lantronix EPS, Справочное руководство

Поделиться
Скачать
Lantronix EPS Скачать руководство пользователя страница 45

Server Configuration

Creating Services

4-9

4.6.4   Enabling Other Service Options

In addition to TCPport and Telnetport, several other service options can be enabled on a service:

Table 4-1:  Service Options 

Option

Function

AppleTalk

Enables or disables AppleTalk access to the service. Macintosh computers, 
for example, will see the service name in their Choosers if they are on the 
same zone/network as the Server. Note that all AppleTalk enabled services on 
the Server are assumed to be LaserWriter printers running PostScript. There 
is no way to support non-PostScript devices (such as ImageWriters).

Banner

If enabled, provides a banner page before service data is sent to the port. The 
host software may still provide its own banner page regardless of the Server 
service setting. This option should not be used with PostScript.

Binary

If enabled, prevents the Server from processing the data stream. Disabling 
this feature (the default), allows the Server to convert <LF> to <CR><LF> 
and possibly perform tab expansion. PostScript (below) implies binary mode. 
Binary should be enabled for PCL jobs.

DLC

If enabled, handles NT DLC print connections. 

EOJ

If enabled, appends a user-configurable end-of-job string to every job.

Formfeed

If enabled, appends a Formfeed to print jobs.

LANManager

Enables or disables LAN Manager access to the service.

LAT

Enables or disables LAT access to the service.

NetWare

Enables or disables NetWare access to the service. If NetWare is not enabled 
on any Server services, the Server will not poll the fileservers.

Postscript

If enabled, queries the printer (via Ctrl-D exchanges) to make sure it is ready 
for a new job before starting any job. Any service supporting only a Post-
Script printer should also have this flag enabled.

PSConvert

If enabled, encapsulates text sent to the service in a PostScript wrapper. This 
allows text-only queues to print to PostScript devices.

RTEL

Enables or disables RTEL access to the service.

SOJ

If enabled, sends a user-configurable start-of-job string to the attached device 
at the beginning of every access.

Содержание EPS
































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды