EDS-MD® Medical Device Server User Guide
45
7: Line and Tunnel Settings
The EDS-MD device servers contain four, eight or sixteen serial linesdepending on the specific
model. All lines use standard RS232 serial ports. All lines can be configured to operate in the
following modes:
RS232
All serial settings such as Baud Rate, Parity, Data Bits, etc, apply to these lines.
Line Statistics
This page displays the current status and various statistics for the serial line.
Note:
The following section describes the steps to view Line 1 statistics; these steps
apply to other line instances of the device.
Using Web Manager
To view statistics for Line 1, click
Line
in the menu and select
Line 1 ->
Statistics
.
Using the CLI
To view Line statistics:
enable -> line 1, show statistics
Using XML
Include in your file:
<statusgroup name=”line” instance=”1”>
Line Settings
Note:
The following section describes the steps to configure Line 1; these steps apply to
other line instances of the device.
To Configure Line Settings
Using Web Manager
To configure Line 1, click
Line
in the menu and select
Line 1 ->
Configuration
.
Using the CLI
To view Line statistics:
enable -> line 1, show statistics
Using XML
Include in your file:
<statusgroup name=”line” instance=”1”>
The Line Settings allow configuration of the serial lines (ports).
