Lantronix EDS-MD Series Скачать руководство пользователя страница 2

Страница: 2 / 111

EDS-MD® Medical Device Server User Guide

Intellectual Property

transmitted or reproduced in any form or by any means without the written permission of Lantronix.

Lantronix

and

EDS-MD

are registered trademarks of Lantronix, Inc. in the United States and other

countries.

DeviceInstaller

is a trademark of Lantronix, Inc.

Patented:

patents.lantronix.com

; additional patents pending

Windows

and

Internet Explorer

are registered trademarks of Microsoft Corporation.

Mozilla

and

Firefox

are registered trademarks of the Mozilla Foundation.

Chrome

is a trademark of Google Inc.

Safari

is a registered trademark of Apple Inc. All other trademarks and trade names are the

property of their respective holders.

Warranty

For details on the Lantronix warranty policy, please go to our web site at

www.lantronix.com/support/warranty

Contacts

Lantronix, Inc.

7535 Irvine Center Drive

Suite 100

Irvine, CA 92618, USA
Toll Free: 800-526-8766

Phone:

949-453-3990

Fax:

949-453-3995

Technical Support

Online:

www.lantronix.com/support

Sales Offices

For a current list of our domestic and international sales offices, go to the Lantronix web site at

www.lantronix.com/about/contact

Disclaimer

All information contained herein is provided “AS IS.”

Lantronix undertakes no obligation to

update the information in this publication.

Lantronix does not make, and specifically disclaims,

all warranties of any kind (express, implied or otherwise) regarding title, non-infringement, fitness,

quality, accuracy, completeness, usefulness, suitability or performance of the information provided

herein. Lantronix shall have no liability whatsoever to any user for any damages, losses and

causes of action (whether in contract or in tort or otherwise) in connection with the user’s access or

usage of any of the information or content contained herein.

The information and specifications

contained in this document are subject to change without notice.

Содержание EDS-MD Series
















































































































Результаты поиска

Содержание EDS-MD Series

Отзывы:

Похожие инструкции для EDS-MD Series

Бренды по названию

Популярные бренды

Lantronix EDS-MD Series, Руководство пользователя

Результаты поиска

Содержание EDS-MD Series

Отзывы:

Похожие инструкции для EDS-MD Series

Бренды по названию

Популярные бренды