Lantronix
ION x222x / x32xx Install Guide
33433 Rev. D
Page
24
of
42
9.
Enter a
go
command to change the location for the command prompt. The
go
command format
is:
go [c=<1-16>] [s=<1-32>] [l1ap=<1-15>] [l2ap=<1-15>] (l1p=<1-5>|l2p=<1-15>|l3p=<1-15>|l1d|l2d|l3d)
(for a slide in card), or
go [c=<0-16>] [s=<0-32>] [l1ap=<1-15>] [l2ap=<1-15>] (l1p=<1-5>|l2p=<1-15>|l3p=<1-15>|l1d|l2d|l3d)
(for a standalone card).
10.
Enter commands to set up the various configurations for the NID. For a description of all available
CLI commands see the
ION Systems CLI Reference Manual, 33461
.
Note
: If required by your organization’s security policies and procedures, use the CLI command
set
community write=<xx>
to change the default password. See the
ION Systems CLI Reference Manual
,
33461.
Terminating a USB Connection from HyperTerminal
To terminate the USB connection, do the following.
1. At the command prompt, type
q
(uit).
2. Press
Enter
.
3. Click
Call
>
Disconnect
.
4. Click
File
>
Exit
.
