Lantech LPGS-2424C Series, Руководство пользователя

Страница: 8 / 24

Revision 1.0
6
1.2 Front & Rear Panels
1.2.1 Front Panel
The interfaces on the front panel of the Managed Switch are described below:
1. 24 x 10/100/1000Base-T RJ-45 ports (Ports 1-24)
2. 4 x Gigabit combo ports (Ports 25-28):

4 x 10/100/1000Base-T RJ-45 ports, or

4 x 100/1000Base-X SFP ports
3. Reset Button:

Press the reset button for 5~13 seconds, then release it to restart the system.

Press the reset button for 13~20 seconds, then release it to reset the Managed
Switch. The settings will be reset to the supplier defaults and restart the system.

Press the reset button for more than 20 seconds, then release it to reset the
Managed Switch. The settings will be back to the factory defaults and restart the
system.
4. Console Port:

An asynchronous serial console port supports the RS-232 electrical specification.
The console port can be used to manage the device, and the serial console port
settings should be configured as 9600, 8, n, 1.
5. LEDs:

Includes Power LED, Status LED, COM LED, Speed/Link/Act LEDs of TP 1~24
ports, PoE LEDs of 1~24 ports and LEDs of TP & Fiber 25~28 ports. For more
details on LEDs description, please refer to Section
1.3 LED Definitions .
1
2
5
4
1
2
5
Figure 1-1. Front Panel of LPGS-2424C Managed Switch
5
3