Lantech LPGS-2424C Series, Руководство пользователя

Страница: 17 / 24

Revision 1.0
15
2.3.2 Rack Installation
In the following section, we will take the LPGS-2424C Managed Switch for example to install a 19-
inch switch in a standard 19-inch network equipment rack.
WARNING!
Please mount the Switch firmly in rack, otherwise it may fall and cause the
system damage and possible injury to personnel
.
2.3.2.1 Install LPGS-2424C Switch in a Rack
The Managed Switch can be mounted in an EIA standard-sized, 19-inch rack, which can be placed
in a wiring closet with other equipment. Rack mounting brackets are provided to mount the Switch.
Just follow the procedures listed below for step-by-step instructions to install your switch in this rack
space:
Step 1.
Plan the rack position.
Step 2. Align the mounting holes in the brackets with the desired holes in the rack, and insert
screws through each bracket and into the rack. (See Figure 2-1)
Step 3.
Then, tighten the screws with the screwdriver to secure mounting brackets to the rack.
Step 4. Please ensure that the ventilation holes are not blocked.
Figure 2-1. LPGS-2424C Switch Rack-
mounting