10
The LED indicators located on the front panel display the power status
and network status of the Industrial switch; each has their own specific
meaning as the table shown below.
LED
Color
Description
PWR1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
PWR2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Red
On
Power input 1 or 2 is inactive
Off
Power input 1 and 2 are both functional, or no power
inputs
6
Green
On
A network device is detected.
Blinking
The port is transmitting or receiving packets from
the TX device.
LNK/ACT
Green
On
A network device is detected.
Blinking
The port is transmitting or receiving packets from
the TX device.
FDX/COL
Yellow
On
Full-duplex mode
Blinking
Collision occurs
PoE
Yellow
On
The port is operating in PoE mode.
Off
The port is not operating in PoE mode.
Dip Switch (IES-0204DFT / IPES-0204DFT-4)
The SFP speed can be selected by switching the DIP switch.
(The DIP switch will not work when switch is in power on status, please set the DIP then
power on the switch.)
