Lantech IGS-2206C, Руководство пользователя

Страница: 79 / 118

72
2. Group ID: There are three trunk groups to provide configure. Choose the " Group
ID " and click
Select
.
3. LACP: If enable, the group is LACP static trunk group. If disable, the group is local
static trunk group. All ports support LACP dynamic trunk group. If connecting to the
device that also supports LACP, the LACP dynamic trunk group will be created
automatically.
4. Work ports: allow max four ports can be aggregated at the same time. With LACP
static trunk group, the exceed ports are standby and can be aggregated if work
ports fail. If it is local static trunk group, the number of ports must be the same as
the group member ports.
5. Select the ports to join the trunk group. Allow max four ports can be aggregated at
the same time. Click
Add
button to add the port. To remove unwanted ports,
select the port and click
Remove
button.
6. If LACP enable, you can configure LACP Active/Passive status in each ports on
State Activity page.
7. Click
Apply
.
8. Use
Delete
button to delete Trunk Group. Select the Group ID and click
Delete
button.