Lantech IES-2008B-DNV, Руководство пользователя

Страница: 35 / 127

28
Guam Standard, USSR
Zone 9
IDLE - International Date
Line
NZST - New Zealand
Standard
NZT - New Zealand
+12 hours Midnight

SNTP Sever Address: Set the SNTP server IP address. You can assign a local
network time server IP address or an internet time server IP address.

Daylight Saving Time: This is used as a control switch to enable/disable daylight
saving period and daylight saving offset. Users can configure Daylight Saving
Period and Daylight Saving Offset in a certain period time and offset time while
there is no need to enable daylight saving function. Afterwards, users can just set
this item as enable without assign Daylight Saving Period and Daylight Saving
Offset again.

Daylight Saving Period: Set up the Daylight Saving beginning date/time and
Daylight Saving ending date/time. Please key in the value in the format of
‘YYYYMMDD’ and ‘HH:MM’ (leave a space between ‘YYYYMMDD’ and ‘HH:MM’).

YYYYMMDD: an eight-digit year/month/day specification.

HH:MM: a five-digit (including a colon mark) hour/minute specification.
For example, key in
‘20070701 02:00’ and ‘20071104 02:04’ in the two column
fields respectively to represent that DST begins at 2:00 a.m. on March 11, 2007
and ends at 2:00 a.m. on November 4, 2007.

Daylight Saving Offset : For non-US and European countries, specify the amount
of time for day light savings. Please key in the valid figure in the range of minute
between 0 and 720, which means you can set the offset up to 12 hours.

Click
Apply
to have the configuration take effect.