42
RSTP– System Configuration Interface
Per Port Configuration
Configuring the path cost and priority of every port
1. Select the port in Port column
2.
Path Cost:
The cost of the path to the other bridge from this transmitting
bridge at the specified port. Enter a number 1 through 200000000.
3.
Priority:
Decide which port should be blocked by priority in LAN. Enter a
number 0 through 240. The value of priority must be the multiple of 16.
4.
Admin P2P:
Some of the rapid state transactions that are possible within
RSTP are dependent upon whether the port concerned can only be
connected to exactly one other bridge (i.e. it is served by a point-to-point
LAN segment), or can be connected to two or more bridges (i.e. it is served
by a shared medium LAN segment). This function allows the P2P status of
the link to be manipulated administratively. True is P2P enabling. False is
