36
apply the new IP settings.
DHCP Client:
Enable
or
Disable
the DHCP client function. When DHCP
client function is enabling, the industrial switch will be assigned the IP
address from the network DHCP server. The default IP address will be
replace by the DHCP server assigned IP address. After click “Apply” button,
a popup dialog will show up and inform the user that when the DHCP client
is enabling, the current IP will be lost and user can find the new IP on the
DHCP server. To cancel the DHCP client function, click “cancel”.
IP Address:
Assign the IP address that your network is using. If DHCP
client function is enabling and then user does not need to assign the IP
address. And, the network DHCP server will assign the IP address for the
industrial switch and display in this column. The default IP is 192.168.16.1.
Subnet Mask:
Assign the subnet mask of the IP address. If DHCP client
function is enabling and then user does not need to assign the subnet
mask.
Gateway:
Assign the network gateway for the industrial switch. The default
gateway is 192.168.16.254.
IP configuration interface
SNTP Configuration
Configure the SNTP (Simple Network Time Protocol) settings which SNTP
allows user to synchronize switch clocks in the Internet.
