PAGE 6 / 6
12. Transferring a call to the mobile phone
During an active call, press the TALK button for about 2 seconds.
This function only works in the Hands-Free Profile.
In the Headset profile, you can simply turn off your headset.
13. Transferring a call to LANSO A6+
During an active call on the mobile phone, press the TALK button shortly on the
headset to transfer the call from the mobile phone to the headset.
14. Multi Pairing
LANSO A6+ can be paired to two Mobile Phones (Audio Gateways).
In the following description, the last paired Audio Gateway will be called Primary
Phone, and the previously paired phone will be called Secondary Phone.
For instance :
Your headset is already paired with a NOKIA 3650 mobile phone.
You perform a pairing with a SONY ERICSSON T68i phone :
- your T68i phone will be the Primary Phone,
- your NOKIA 3650 phone will be the Secondary Phone.
All Outgoing Calls from LANSO A6+ are sent only to the Primary Phone.
However, an incoming Call on any phone (primary or secondary) will be sent to your
LANSO A6+ headset, and it can be answered on the headset (if LANSO A6+ has no
link established with the other phone which is not receiving the latest incoming call).
The multi-pairing only works with headsets which are both in the headset profile.
(Note: all brand names are the property of their respective owners).
CAUTION : Danger of explosion if battery is incorrectly replaced. Replaced only with
the same or equivalent type. (voltage : 3.1 –5.5V, typical 3.8V, typical current 40mA)
FCC Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions
for satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Notice: Any changes or modification not expressly approved by the party responsible
could void the user
’
s authority to operate the device.
