PAGE 5 / 6
Mobile without voice recognition
. Make sure both the headset and the mobile phone are ON and in stand-by mode.
. Dial the phone number you wish to call on your mobile phone.
. After roughly 2 seconds, the audio connection is established.
6. Answering a call
When the headset rings, press the TALK button shortly.
7. Rejecting a call
Press the TALK button for about 2 seconds when the headset is ringing.
This function only works in the Hands-Free Profile.
8. Ending a call
Press the TALK button shortly to end an active call.
9. Redial Last Number
Press the VOL+ or VOL- buttons, or press on both VOL buttons for about 2
seconds if there is no active call and no incoming call, until you hear a beep.
This function only works in the Hands-Free Profile.
10. Adjusting the volume
The headset has been designed with one VOL+ button, and one VOL- button.
So to increase the volume during an active call, make sure you press shortly and
gently on both back buttons
(VOL+)
simultaneously.
And to decrease the volume during an active call, make sure you press shortly and
gently on both front buttons
(VOL-)
simultaneously.
11. Muting the microphone
To mute the microphone during an active call
Press on VOL+ or VOL- buttons, or on both VOL buttons, simultaneously for about 2
seconds.
A periodic tone is heard in the speaker while the microphone is muted.
To end the mute function
When the microphone is muted, a short press on VOL+ or VOL- buttons, or on both
VOL buttons, simultaneously will end the mute function and the periodic tone will
disappear.
