background image

PAGE 4 / 6 

4. Follow the phone instructions to accept the pairing. The PIN code (or passkey) 

is 0000. 

5. When the pairing is completed, the indicator light will switch to green, and 

flashes slowly. 

 
If you haven’t started the discovery mode within 5 minutes, the headset will switch 
off. You must then switch on your headset and start the pairing again. 
 

 
 

3. Wearing LANSO A6+ 

The headset can be used on both ears. Rotate the ear clamp if you want to use it on 
the other ear. The ear clamp is made of soft material which can be easily shaped to 
fit your ear.  Make sure the speaker is properly inserted into your ear. 

4. Switching LANSO A6+ ON and OFF 

 

Switching LANSO A6+ ON 

Press and hold the TALK button for about 2 seconds until the  green indicator light is 
on. A beep (2 tones) can be heard in the speaker. Release the TALK Button. 
 
If LANSO A6+ is paired in the Hands Free profile, it will try to connect automatically 
to the paired Audio Gateway (e.g. mobile phone). 
 
If LANSO A6+ is paired in the Headset profile, it will stay in standby mode. 

Switching LANSO A6+ OFF 

Press and hold the TALK button for about 5 seconds until the red indicator light is on 
after the quick green flashes. A beep (2 tones) can be heard in the speaker. Release 
the TALK Button. 
 
To save power, the green indicator light flashes at long intervals.  To check if your 
headset is ON , press shortly on the TALK button.  If the indicator light is green, it 
means your headset in ON. 
 

5. Making a call

 

 

The voice recognition (or voice dialling) feature is not available on all mobile phones. 
However you can always dial directly on your keypad. If your mobile phone offers the 
voice recognition feature, you can make a call directly from the headset without any 
operation on you mobile phone. 

 

Mobile phone with voice recognition 

. Make sure the voice recognition function on your mobile is activated and your voice 
tags have been recorded with the phone. 
. Press the TALK button shortly (when there is no incoming and no active Call). The 
audio connection is established. 
. Wait for the audio signal sent by the mobile phone (generally a short tone). 
. Speak out the name of person you wish to call, as stored in the phone voice tags. 
The mobile phone will dial the stored number. 
 

Отзывы: