www.lanpro.com
Active Products - Switches - LP-SW811 10/100M Fast Ethernet Switch - USER GUIDE
5
Appendix A: Specifications
5
Power LED:
This indicator will light up when the Switch powers up. If the LED is not lit, please check the power
adapter and connection.
LINK/ACT LEDs:
These LEDs indicate Link/Active status. One LED indicator will light green when a device is
connected to the corresponding port. It flashes when data is being transmitted or received on the connection.
External Power Adapter supply.
General
Standards
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX
Topology
Star
Protocol
CSMA/CD
Data Transfer Rate
Ethernet: 10Mbps (Half Duplex), 20Mbps (Full Duplex);
Fast Ethernet: 100Mbps (Half Duplex), 200Mbps (Full Duplex)
Network Media (Cable)
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
100BASE-TX: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
Number of Ports
8 10/100Mbps Auto-Negotiation ports
LED indicators
Power, Link/Act
Transfer Method
Store-and-Forward
MAC Address Learning
Automatic learning, automatic update
Frame Filter Rate
10BASE-T: 14880pps/Port;
100BASE-TX: 148800pps/Port
Frame Forward Rate
10BASE-T: 14880pps/Port;
100BASE-TX: 148800pps/Port
Environmental and Physical
Dimensions(W×D×H)
140mm×85mm×30mm (5.5”×3.3”×1.2”)
Power Supply
AC Power Adapter: Output 9VAC 0.8A
Power consumption
LP-SW811: 3.1W (maximum)
Operating
Temperature
0
°C
~40
°C
(32
°C
~104
°C
)
Storage Temperature
-40~70
°C
(-40
°C
~158
°C
)
Operating Humidity
10%~90% non-condensing
Storage humidity
5%~95% non-condensing
