www.lanpro.com
Active Products - Switches - LP-SW811 10/100M Fast Ethernet Switch - USER GUIDE
Package Contents
Chapter 1: Introduction
Chapter 2: Installation
1
2
3
1.1 Overview of the product
1.2 Features
2.1 Installation
The following contents should be found in your box:
Note: If any of the above contents is damaged or missing, please contact the retailer from whom you purchased the
LP-SW811 Switch for assistance.
There is one status LED indicator on the side of the wireless network adapter. It lights up and stays ON when working
correctly, and flashes when transferring data.
To install the Switch, please follow the steps:
LP-SW811 is 8 ports 10/100Mbps Auto-Negotiation Ethernet Switch. All ports support Auto MDI/MDIX function, each
port can be used for general port or Uplink port.
The
LanPro
8-port Fast Ethernet Switch, LP-SW811, provides you a low-cost, easy-to-use, high-performance, seamless
and standard switch to upgrade old network to 100Mbps network. It will boost your network performance up to full
duplex data transfer. Its wire-speed switching that forwards packets can be as fast as the speed that your network
delivers those packets to them.
One LP-SW811 Switch.
One AC power Adapter.
This User’s Guide.
Wall-mounting screws.
Complies with IEEE802.3, IEEE802.3u standards.
8 10/100Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX.
Supports IEEE802.3x flow control for Full Duplex mode and backpressure for half-duplex modeWall-mounting
screws.
Supports MAC address auto-learning and auto-aging.
LED indicators for monitoring power, link, activity.
Plastic case.
External Power Adapter supply.
You can place the Switch on a flat surface or a wall.
Please verify carefully the Power Adapter, make sure it is properly connected to a power source.
Be sure to leave enough space for heat dissipation and good ventilation in the Switch.
Don’t place heavy objects on the Switch.
3
1
2
3
