LP-N24 V2.0
Quick Installation Guide
N24 V2.0
This product can be set up through both Easy-Web Setup and CD Setup Wizard.
Easy-Web Setup: This option is the easiest. The world´s most intuitive Utility Interface guides you to complete
the setup in few minutes.
1
CD Setup Wizard:
2
Configuring your Wireless Router
You’re connected to the internet!
After logging in, you will see the basic setup
window below. Select Ok to apply changes.
Open your web browser, it detects connection automatically. Otherwise enter 192.168.0.1 show as
below:
Insert the LANPRO Setup CD into the CD-ROM drive
of your PC. The CD will automatically start. If the CD
does not run automatically, browse the CD and
double-click on Setup.
The software will detect the configuration of your
network card and it will change its parameters for IP
automatic obtaining. Wait for the process to end.
Click Enter to continue.
In case your LP-N24 V2.0 does not have the
default address 192.168.0.1, the software will
detect it. Select No to use the IP address the
equipment has, or select Yes to cancel the
installation process.
