LanParty Blood-Iron P45 Elite Series, Руководство пользователя

Страница: 133 / 134

C
133
Debug LED POST and Troubleshooting
POST
(hex)
75
7F FF
Debug Code
Action
Power on
-> Stopped at
75
Power on
-> Stopped at
7F
*
Checksum error always appear aft
er the BIOS default
has been l
oaded.
Power on
-> Run to
FF
*
Blank Screen
BIOS
Pr
ogram
Definition
Initializing storage devices. (Probing for IDE devices or SA
TA
devices) BIOS setup module in progress. Reporting BIOS check errors. W
aiting for keys:
DEL
key to load the BIOS default.
F1 key to continue. Boot attempt (INT
19h)
System booted normally
.
Possible Cause
1.
Lost power source of some devices.
2.
Incompat
ible SA
TA
or P
AT
A
device.
3.
CD-ROM’
s spin took too long.
1.
Checksum error occured.
(Change/
add devices such as CPU/
DRAM)
2.
Error occured after clearing the CMOS.
3.
Onboard battery is depleted.
4.
Overcloc
king issue.
*
The batter
y circuit of the MB is
defective.
Normal Operation *
The graphics card was not
connected
properly or it is defective.
Solution
1.
Inspect th
e power cable connection.
2.
Inspect th
e IDE cable connection or
replace another P
AT
A/ SA
TA
device.
3.
Remove
the disc, if present, from the
CD-ROM device.
1.
Load the optimized default setting of the BIOS.
2.
Alter or a
djust the BIOS setting.
3.
Replace a
new battery
.
4.
Decrease
the overclock range.
*
RMA
acti
on required.
Nil *
Remove a
nd reinstall the graphics
card.