LanParty Blood-Iron P45 Elite Series, Руководство пользователя

Страница: 76 / 134

76
3
BIOS Setup
CAS Latency Time (tCL)
This field is used to select the clock cycle of the CAS latency time. The op -
tion selected specifies the timing delay before SDRAM starts a read command
after receiving it.
RAS# to CAS# Delay (tRCD)
This field is used to select the RAS# to CAS# delay time when reading and
writing to the same bank.
RAS# Precharge (tRP)
This field is used to select the idle clocks after issuing a precharge command
to the DRAM.
Precharge Delay (tRAS)
The options are Auto, and 9 to15.
ALL Precharge to Act
The options are Auto, and 2 to 9.
REF to ACT Delay (tRFC)
The options are Auto, and 16 to 33.
Performance LVL (Read Delay)
The options are Auto, and 1 to 15.
Read Delay Phase Adjust
Refer to the following pages for more information on this submenu.
Write to PRE Delay (tWR)
The options are Auto, and 6 to 18.
Rank Write to Read (tWTR)
The options are Auto, and 6 to 18.
ACT to ACT Delay (tRRD)
The options are Auto, and 1 to 15.
Read to Write Delay (tRDWR)
This field is used to select the read to write delay time. Although this is not a
DRAM specified timing parameter, it is related to the routing latencies on the
clock forwarded bus. This is measured from the first address bus slot which
is not associated with part of the read burst.