Chapter 5 Product Assembly Guide
5.1 Assembly with Trinocular Microscope
1.Screw out the dust cover of interface C of the trinocular microscope, as shown in figure 1
2.Install with a trinocular microscope, as shown in figure 2
1) screw out the dust cover of the camera
2) tighten the camera to the thread of the microscope C- interface
3) use the allen key to lock the three meter screws at the microscope C-interface
5.2 Disassembly the Camera
Reverse the assembly sequence
User's Manual | Microscope Camera JX Series
www.lanoptik.com
- 5 -
Figure 1
Figure 1
3.The adapter interface is inserted into the display power hole.Connect the adapter to 110-240V AC.
