2.15.6" LCD screen
1.WiFi antenna:
external signal antenna can enhance WiFi signal transmission
3.Speaker hole:
volume channel hole
4.USB 3.0 port:
Can connect a mouse, keyboard or USB flash disk, convenient use of embedded APP
5.USB 2.0 port:
Can connect a mouse, keyboard or USB flash disk, convenient use of embedded APP
6.HDMI port:
Through the HDMI cable, connect with the display device with HDMI interface, realize video, signal
transmission
7.Rotation axis:
Support the display front and back, up and down rotation
8.Power input:
For power supply
9.Network port
Connect to the camera and power the camera
10.USB 2.0 port:
Connect with the headset wire to realize the mutual transmission of audio signals.
11.Headset port:
For power supply
12.Reset hole:
Long press for 8 seconds to reset the camera.
13.LED indicator:
Startup state: the green light flashes when starting up until entering the system. After entering
the system, the green light is always on when there is no WiFi connection.
WiFi: flash green light.
There are two colors of lights:
14.Power On/Off:
Power on: long press for 3 seconds; Power off: long press for 3 seconds.
4.1 Name and Function for Each Part of the Camera
Chapter 4 Function Introduction of Each Part
User's Manual | Microscope Camera JX Series
www.lanoptik.com
- 4 -
15.C -mount thread::
can be directly connected with C and CS interface microscope. * Dovetail mount
16.Master interface:
Connect with the eyepiece end of the microscope.
17.Dust-free cover::
screw it out before use, the function of dust and protection.
