Lanner NCA-2513, Руководство пользователя

Страница: 27 / 84

Installing the System Memory
The motherboard supports 2 memory slots for DDR4 UDIMM with speeds up to 2666MHz. The CPU requires
at least 2 memory modules to boot and run from.
Supported System Memory Summary
Total Slots 2
Number of Channels 2 (2 DIMMs per channel)
Supported DIMM Capacity 4GB, 8GB, 16GB, 32GB
Memory Size Maximum 64 GB (32GB*2)
Memory Type DDR4 2400/2133 MHz REG, ECC or Non-ECC UDIMM/RDIMM
Minimum DIMM Installed At least 1 memory modules to boot and run from
Memory Module Installation Instructions
Please follow the steps below to install the DIMM memory modules.
1.
Power off the system.
2. Pull open the DIMM slot latches.
3. Align the notch of the module with the socket key in the slot and carefully insert the card into the slot.
4. Push the module down into the slot until it is firmly seated. Press vertically on both corners of the card
until it clicks into place.
Click
Click
Notch
Socket Key