IIOT-I530 User Manual
33
3. If a Wi-Fi module will not be added,
then place metal Partition B (included
in Partition & Thermal Pad Kit), over
the 5G module, and secure with one
(1) screw on the partition and two (2)
screws on the side panel.
4. Screw on the four (4) antennas to the
system
’s rear panel
.
The SIM slot on the front panel supports the 5G module card. The SIM socket supports the push-push
mechanism, allowing inserting and ejecting the SIM card to be as easy as one push.
1. Locate the door of SIM card slot on
the front panel.
2. Loosen the twist-screw and remove
the slot cover.
3. There are two (2) nano-SIM slots, one
on the upper side and another on the
bottom side.
4. Insert and push the nano-SIM card all
the way in until it clicks into place.
5. To remove the nano-SIM card, use your fingertips to push it once, to have the card automatically ejected.
6. Place the door back and tighten the twist-screw.