IIOT-I530 User Manual
26
The motherboard supports 2x DDR4 3200MHz SO-DIMM, up to 64GB, for additional system memory. Please
follow the steps for installation.
1. Power off the system, turn the system around,
and open the bottom chassis cover. Locate the
DIMM socket on the motherboard.
2. Next, thermal pad placement. Remove the
protective film from Thermal Pad A (included in
Partition & Thermal Pad Kit), and gently place
on the motherboard. The thermal pad needs to
be underneath the DIMM module.
3. Align the notches of the DIMM module with the
socket key in the pin slot.
4. Insert the module into the slot at a diagonal
angle and press it down until it is firmly seated
by the clips on both sides.
Socket Key
Notch
Click
Click