Save & Exit
Save and Exit
Select the Exit tab from the setup screen to enter the Exit
BIOS Setup screen. You can display an Exit BIOS Setup
option by highlighting it using the <Arrow> keys. The
following table lists the options in this menu.
Item
Options
Save Changes and Exit
Select this option to save
changes and exit the BIOS
menu. It will automatically
resets if the changes made
require rebooting the
system to take effect.
Discard Changes and
Exit
Select this option to discard
changes and exit and BIOS
menu to continue the
booting process.
Save Changes and
Reset
When you have completed
the system configuration
changes, select this option
to leave setup and reboot
the computer so the new
system configuration
parameters can take effect.
Discard Changes and
Reset
This option allows you
to discard the selections
you made and restore the
previously saved values.
After selecting this option,
a confirmation appears.
Select Yes to discard any
changes and load the
previously saved values.
Save Changes
Save your changes
Discard Changes
Discard changes
Restore Defaults
Restore to factory defaults
Save as User Defaults
Save all of your changes as
an user default setting.
Restore User Defaults
Loads your saved user
default setting.
Boot Override
This section of the boot
menu allows booting
from a specific device
immediately. Therefore you
should see an entry for all
bootable devices.
Launch EFI Shell from
filesystem device
This option allows you
to attempt to launch the
EFI Shell application
(shellx64.efi) from one
of the available filesys
-
tem devices.
