Lanier LW110, Руководство по эксплуатации

Страница: 31 / 189

Copying onto Roll Paper (Option)
19
2
Copying onto Roll Paper (Option)
The paper will be fed to the copier from the Roll Feeder. You can copy onto roll
paper using the following functions:
• Semi Synchro cutting
• Preset cutting
• Variable cutting
Note
❒
If unused roll paper is left in the copier, cut 1000mm (39.4") from the edge of
the paper before you start copying.
❒
When you want to copy a long original, curled original, or the thin original
(less than 0.1mm) which can be easily bent down, open the guides to keep the
original away from the paper entrance.
R
CAUTION:
Semi Synchro cutting
This feature lets you cut the roll paper manually to a length that approximates
to that of the original. This saves you having to measure and enter the length of
every original.
Note
❒
Semi Synchro Cut can handle the cut length in the range 440 ~ 3000mm, 17.3"
~ 118.0".
• If during copying your original gets stuck in the copier, press the
{
Emergency Stop
}
key.
• If you stop operation by pressing this key, remove both the origi-
nal and paper.